Fire Door Solutions is the industry leader in passive fire protection services and products for Fire Door compliance.


NFPA 80 Annual Fire Door Inspections

fire-door-inspections-slideshow

Fire rated doors are integral components of any passive fire-protection design in the built environment. Without proper design specifications and comprehensive inspection and maintenance procedures, fire doors that fall into this latter category are significantly less likely to effectively protect the opening. To protect against the spread of fire and smoke within, into or out of buildings, maintenance and engineeringRead the Rest…


Fire Door Field Labeling

Fire Door Field Labeling

As the 2012 edition of the Life Safety Code regarding NFPA 80 is adopted by your Authority Having Jurisdiction (AHJ), one of the most significant changes will be to fire rated doors and the hardware on those doors. Missing or illegible certification mark labels on fire rated doors is a common problem for most commercial properties. Fire Door Solutions fieldRead the Rest…


Fire Door Solutions Announces Release of Fire Door Caulk

fire-door-caulk-slideshow

Fire Door Caulk is the only tested and approved filler material for filling voids and through penetrations in existing listed and labeled wood fire doors.  Fire Door Caulk has been tested to the following criteria, NFPA 252, UL10C and CAN S104/. Fire Door Solutions Announces Release of Fire Door Caulk Overland Park, KS. June 29, 2012- Fire Door Solutions announcesRead the Rest…


Fire Door Solutions Announces Release of Fire Door Thru-Bolt

Fire Door Thru Bolts

The Fire Door Thru-Bolt is a simple male and female type application that is available in 1/4″ and 1/2″ widths for both 1-3/4″ and 2″ fire rated doors. Fire Door Thru-Bolt is used for holes up to 1/2″ in steel fire rated doors. The Thru-Bolt is an aesthetically pleasing solution compared to unsightly normal bolts. The Thru-Bolt comes primed andRead the Rest…


Fire Door Gap Gauge

fire-door-gap-gauges-slideshow

The Fire Door Gap Gauge is a simple tool used by fire door industry inspectors to measure clearance requirements per the NFPA 80 code compliance. Clearance requirements are the most recognized issue for fire door non-compliance. The Fire Door Gap Gage will speed up your fire door inspections, is more accurate than a tape measure and is compact and easyRead the Rest…


Fire Door Shims

fire-door-shims-slideshow

Fire Door Shims During fire door inspections clearance issues generally are one of the major non-complaint deficiencies that a facility has to address.  Our Fire Door Shims are REMOVABLE, RESTICKABLE and STACKABLE. Simply place them behind the hinge to push door towards the strike or to pull away from strike.  You’ll shim doors in less than a minute. Our FireRead the Rest…


We are committed to developing and identifying products and services which make the NFPA 80 code compliance a less challenging task for commercial facilities. ----- Jeff Perry, Executive Director